You Need Spray Bottles? We Got ‘Em!

We sell spray bottles everyday at Pure Spa Direct, however, this week saw a big jump in the 8 oz. Fine Mist Dispenser Bottle by Soft ‘n Style. I have a few at home to water my indoor plants. I like it because it produces a fine mist which allows you to water to perfection…. why? I have no idea… I’m just a shipping guy! See our great Fine Mist Dispenser Bottle HERE!

This Blog Post: You Need Spray Bottles? We Got ‘Em! originally appeared on Blogger.

Everything You Need for One Amazing Facial in One Amazing Unit!

The Karo 6-in-1 Table Top Multi-Function Facial Machine has a modern and professional design. A combination system with five individual functions. Cold & Hot Hammer, High Frequency, Exfo Brush, Vacuum and Spray. The combined effect of these drainage and sterilization treatments will give customers balanced and cleansed skin.

Details:

  • Hot Hammer – The hot hammer head provides heat for muscle relaxation and skin pore opening.
  • Cold Hammer – The cold hammer head is used to apply cool on the skin, reducing wrinkles, smoothing skin and closing pores.
  • High Frequency – Stimulates circulation of the blood, increases glandular activity, aids in elimination and absorption, increase metabolism, germicidal action, generates heat inside the tissue and aids in deeper penetration of products into the skin.
  • Brush Peel – Clients can relax and enjoy the soft massage while the brush deep cleanses into pores to remove any dirt and debris. Helps accelerate the lymph circulations and remove toxins. Also helps stimulate acupuncture points.
  • Vacuum – Works to suction out the deeply embedded dirt, grease, and other impurities. The suction also provides for a deep penetrating facial massage and draws blood to the surface of the skin.
  • Spray – Helps achieve thorough cleansing of the skin’s surface. Great for flushing out the pores after suction and extractions.

Important:

  • Always make sure the spray head is connected to the right nozzle of the machine, to prevent accidental vacuuming of any spray solution into the pump, which can damage the pump of your machine and void your manufacturer’s warranty.
  • Do not use the vac/spray pump for extended periods without cool-down time between treatments in order to prevent overheating of the pump and damage to the machine. Damage caused by overheating of the pump is not covered by the manufacturer’s warranty.

For more multi-function units click here

This Blog Post: Everything You Need for One Amazing Facial in One Amazing Unit! originally appeared on Blogger.

Vacuum / Spray Facial Machine Troubleshooting – This Common Mistake Can FRY Your Vacuum / Spray Equipment… READ THIS NOW!

Do you use a vacuum/spray unit in your facials? This equipment is so effective to assist in getting a really nice, deep clean for all skin types.

We recently had a client who was having some trouble with her vacuum/spray unit, and it was found that at some point, the unit was set up incorrectly. In talking to the manufacturer’s technician, they told us they see this trouble often, so I wanted to share this important information with our readers!

A vacuum/spray unit is a fairly simple piece of equipment to use, but the trouble is that the setup for the vacuum side and the spray side is the same – usually the same color tubing is attached to either an input for the vacuum (which sucks inward), or an output for the spray (which sprays outward).

If the tubing for the spray bottle is attached to the vacuum input, water or liquid can be sucked into the equipment. Once water has made its way into the innards of the unit, it can cause damage to the motor, and eventually cause the motor to seize or stop working. All it takes is 1 time – even if the error is realized almost immediately – if a small amount of water is pulled into the unit, it could eventually cause damage you can’t see.

Take a look at the photos below – these are the inside of a vacuum/spray unit that has gotten water inside, and stopped working:

In order to prevent this from happening, we strongly suggest marking the hoses and coinciding connector on the machine with color coding to help ensure the equipment is set up properly. Something as simple as, for example, a red dot of nail polish on the hose and a red dot above the corresponding connector for the vacuum and a different color for the spray hose/connector can make all the difference in keeping your equipment working as it should!

Your hands and your equipment are the lifeblood of your business – a quick marking can keep it running properly!

This Blog Post: Vacuum / Spray Facial Machine Troubleshooting – This Common Mistake Can FRY Your Vacuum / Spray Equipment… READ THIS NOW! originally appeared on Blogger.

Spray, Spray the Dirt Away

During the summer-time you can count on booking plenty of appointments for clients who are looking to improve their appearance for those special occasions or just a day on the beach. You can ensure that your clients get the perfect look with the best body waxes and body waxing products. However, it can be annoying when you run out of products like pre-wax Spray during a session. To make that doesn’t happen to you, stocking up on a few bottles of this spray from Amber Professional will do the trick! The Pre-Wax Spray by Amber Professional is a gentle antiseptic that helps to clean and soothe the skin before a waxing session. It is also useful for calming irritated skin by reducing redness and minor swelling of the tissues that may occur from activities like exfoliation before waxing. Tea Tree Oil is the active ingredient in this product that provides many beneficial effects!

Wave bye-bye to that icky oil and dirt!!

AMBER Pre-Wax Spray with Tea Tree

This Blog Post: Spray, Spray the Dirt Away originally appeared on Blogger.